Home News Latest Products News Standard Automatic Flush Bolts for Wood Door: A Buyer's Guide

TL;DR:

Automatic flush bolts for wood doors secure the inactive leaf of a double door and latch automatically when the door closes. Keyman Lock's QK8007 is a heavy-duty automatic flush bolt built for interior wood doors and fire-rated wood door applications, featuring a recessed flush design, non-handed operation, and use in top-and-bottom pairs.

If you've ever struggled with a double door where one leaf won't stay put, you already understand the problem automatic flush bolts solve. These small, recessed hardware components do a lot of heavy lifting (literally) by locking the inactive door leaf into the frame or floor, so your active door operates smoothly and your opening stays secure.

This guide breaks down what automatic flush bolts are, how they work on wood doors specifically, and what to look for when specifying hardware for commercial or fire-rated applications. We'll also look at the Keyman QK8007, a standard automatic flush bolt engineered for timber doors.

What Are Automatic Flush Bolts?

Automatic flush bolts are door hardware components installed into the edge of a door leaf, typically the inactive leaf of a pair of double doors. Unlike manual flush bolts, which require someone to physically slide a lever or rod to engage the bolt, automatic flush bolts latch into the frame or strike plate automatically when the door closes.

The "flush" part of the name refers to the recessed, flush-mounted design. Once installed, the bolt sits within the door's edge rather than protruding from the surface, which keeps the opening looking clean and avoids snagging clothing, carts, or equipment passing through.

Automatic flush bolts for wood doors are most commonly used on:

  • Interior double door openings in offices, schools, and healthcare facilities

  • Fire-rated wood door assemblies requiring reliable self-latching hardware

  • Storage rooms, conference rooms, and other spaces with inactive door leaves

How Does an Automatic Flush Bolt Work on a Wood Door?

An automatic flush bolt works through a trigger mechanism connected to the door's closing motion. As the active door leaf closes against the inactive leaf, a lever or pin on the flush bolt is depressed, releasing the bolt to extend into a strike plate mounted in the floor, header, or frame.

This mechanism eliminates a common failure point in double-door openings: forgetting to manually engage the bolt. Because the bolt latches automatically, the inactive door leaf stays secured every time the doors close, which matters most in fire-rated assemblies where a properly latched door is essential to maintaining the fire barrier.

Most heavy-duty automatic flush bolts, including the Keyman QK8007, are installed in pairs, one at the top of the door and one at the bottom. This top-and-bottom configuration anchors the inactive leaf at two points, reducing play and improving overall door stability.

What Makes a Flush Bolt "Heavy-Duty"?

Not all automatic flush bolts are built for the same demands. A heavy-duty automatic flush bolt is designed to withstand frequent use, higher door weights, and the operational stress found in commercial settings. These units typically feature thicker bolt construction, reinforced internal mechanisms, and finishes that resist wear over years of daily operation.

Choose a heavy-duty automatic flush bolt if your door sees high foot traffic, is part of a fire-rated assembly, or is installed in a commercial building where hardware failure means a costly service call. For lower-traffic residential applications, a standard-duty bolt may be sufficient, but commercial and institutional settings generally call for the added durability of heavy-duty hardware.

Automatic Flush Bolts

Keyman QK8007: Automatic Flush Bolt for Wood Doors

Zhongshan Keyman Locks Products Ltd., operating under the Keyman Lock brand, manufactures the QK8007, a heavy-duty automatic flush bolt purpose-built for timber doors. Here's what defines this model:

Recessed Flush Design

The QK8007 is installed flush within the door edge, keeping the hardware concealed and the door surface clean. This recessed flush design is standard for automatic flush bolts and helps the hardware blend into the door rather than standing out.

Automatic Latching Upon Door Closure

As described above, the QK8007 latches automatically when the door closes, removing the need for manual engagement and reducing the risk of an unsecured inactive leaf.

Reversible (Non-Handed) Operation

The QK8007 is non-handed, meaning it can be installed on either a left-hand or right-hand door without needing a separate part number for each configuration. This simplifies ordering and inventory management for distributors and contractors working across multiple door configurations.

Designed for Use in Pairs

Like most heavy-duty automatic flush bolts, the QK8007 is intended for installation in pairs, top and bottom, on the same inactive door leaf.

Suitable for Fire-Rated Wood Door Applications

The QK8007 is suitable for fire-rated wood door applications, making it a relevant option for openings that must meet fire-code latching requirements in addition to standard interior wood door use.

Who Should Use This Type of Hardware?

Choose an automatic flush bolt like the QK8007 if your project involves:

  • Interior wooden double doors where one leaf remains inactive most of the time

  • Fire-rated wood door openings that require dependable, consistent latching for code compliance

  • Commercial or institutional settings where non-handed, heavy-duty hardware simplifies installation and reduces long-term maintenance

If your opening is a single-leaf door, or if the application calls for exterior-grade or electrified hardware, an automatic flush bolt designed for wood doors isn't the right fit. In those cases, look at exit devices, mechanical mortise locks, or electrified hinge solutions instead.

Specifying Automatic Flush Bolts: What to Check Before You Order

Before finalizing hardware for a double-door wood opening, confirm the following:

  1. Door material compatibility. Flush bolts designed for wood doors differ from those designed for hollow metal or aluminum doors. Confirm the bolt is rated for timber applications.

  2. Fire rating requirements. If the opening is part of a fire-rated assembly, verify the flush bolt is listed as suitable for fire-rated wood door applications.

  3. Handing. Non-handed, reversible bolts like the QK8007 reduce the risk of ordering the wrong configuration.

  4. Top and bottom pair requirements. Confirm the quantity needed. Most installations require two units per inactive leaf.

  5. Strike plate and frame prep. Ensure the door frame or threshold can accommodate the strike plate location for proper bolt engagement.

Final Thoughts on Choosing the Right Flush Bolt

Automatic flush bolts might be one of the smaller components in a door assembly, but they play an outsized role in keeping double-door openings secure, code-compliant, and functioning the way they should. A heavy-duty automatic flush bolt for wood doors, like the Keyman QK8007, combines a recessed, flush-mounted design with automatic latching, reversible handing, and fire-rated suitability, covering the core needs of most interior wood door installations.

If you're specifying hardware for a new build or retrofit, take the time to match the flush bolt to your door material, fire rating, and traffic level. Getting this detail right up front saves time, reduces callbacks, and keeps your double-door openings performing reliably for years.

Frequently Asked Questions

What is an automatic flush bolt used for?

An automatic flush bolt secures the inactive leaf of a double door by latching it into the frame, floor, or header automatically when the door closes, without requiring manual operation.

Are automatic flush bolts suitable for fire-rated doors?

Yes, select automatic flush bolts, including the Keyman QK8007, are designed and rated for use on fire-rated wood door applications, helping the assembly meet fire-code latching requirements.

Do I need one flush bolt or two per door?

Heavy-duty automatic flush bolts, including the QK8007, are intended for use in pairs, one installed at the top of the door and one at the bottom, to secure the inactive leaf at two points.

What does "non-handed" mean for a flush bolt?

Non-handed, or reversible, means the same flush bolt unit can be installed on either a left-hand or right-hand door without needing separate parts for each configuration.

Can automatic flush bolts be used on metal doors?

This depends on the specific product. The Keyman QK8007 is designed for timber doors; metal door openings typically require a flush bolt model rated for hollow metal or aluminum construction.

KEYMAN is Your Choice Of Security!

If you have any questions regarding our products or services, please leave your details and our team will respond to you.

: +86-13823964887

: +86-13823964887

Contact us

Related Products

Contact Us

: +86-138 239 64887
 : +86-138 239 64887
: +86-138 239 64887
 : No.6 He Ping Road, Lie Xi Yi District, Xiaolan Town, Zhongshan City, Guangdong Province, China

You can fill in the form below to ask us for more product information.

Contact us
Copyright © 2024 Zhongshan Keyman Locks Proudcts Ltd. All Rights Reserved.Sitemap