An electrified exit device combines panic hardware with electric latch retraction or electric strike integration, enabling remote access control without compromising life-safety egress. Keyman's X800/X900 Series delivers UL-listed, ANSI Grade 1 electrified panic exit devices suited for offices, schools, banks, assisted living facilities, and other commercial buildings.
Keyman's exit device lineup — including the X8 Aluminum and X9 Stainless Steel series — is certified to ANSI/BHMA A156.3 Grade 1, UL 305 (Panic Hardware), and UL 10C / ULC-S104 (3-Hour Fire Rating), making them compliant with the most demanding commercial and institutional specifications.
What Is an Electrified Panic Exit Device?
An electrified panic exit device is a push-bar or crossbar-style exit device fitted with an electric actuator that allows the latch to be retracted or held remotely — integrating with card readers, access control panels, or building automation systems. Unlike standard mechanical panic hardware, an electrified panic exit device enables controlled entry from the secure side while always allowing free egress from the inside, as required by fire and life-safety codes.
Keyman's Electrical Exit Devices are part of a complete electrified solution that includes electrified locks, electrified exit device trim, and heavy-duty electrified intermediate pivots.
Keyman X800/X900 Series: Key Features
The X800 and X900 Series exit devices are engineered for new installations and retrofit applications into other manufacturers' existing devices. Core features include:
Field-selectable device function — adapt to the required locking function by pairing with the appropriate trim, without replacing the main device
Reduced-projection push bar — smooth assembly minimizes catch hazard in high-traffic corridors
Full complement of lever trim — available in a wide range of architectural finishes to match door hardware specifications
ANSI/BHMA A156.3 Grade 1 certification — meets the highest durability and cycle-count standards for commercial hardware
UL 305 FVSR (Panic Hardware) — listed for panic hardware applications
UL 10C & ULC-S104 Fire Rated up to 3 Hours — suitable for fire-rated door assemblies
Electric options for access control — supports integration with access control systems via electrified trim or electric latch retraction
Exit Device Product Lines
X8 Aluminum Exit Device Series
The X8 is a UL-listed, ANSI Grade 1 aluminum panic exit device. It is certified to ANSI/BHMA A156.3, UL 10C / ULC-S104 (3-Hour Fire Rated), and UL 305 FVSR. The aluminum construction makes it well-suited for standard commercial door applications where weight and corrosion resistance are priorities.
X9 Stainless Steel Exit Device Series
The X9 shares the same UL and ANSI certifications as the X8 but uses stainless steel construction for superior durability and resistance to heavy use and harsh environments — better suited for high-traffic or exterior applications.
Medium Duty Narrow Panic Exit Device
A narrow-stile panic exit device designed for aluminum frame doors and applications where a reduced-width device is required.
EN1125 Panic Exit Device
Certified to the European EN1125 standard for panic exit hardware — suitable for projects requiring European compliance alongside or instead of ANSI/UL certification.
Exit Device Trim
A full range of trim options — including electrified trim — to complete the exit device assembly and enable access control on the secure side of the door.
Electric Options for Access Control Integration
Keyman exit devices support several electric options that enable access control system integration:
Electric latch retraction (ELR) — retracts the latch remotely to allow entry from the secure side
Electrified trim — pairs an electric lever or knob trim on the outside with the exit device, allowing credential-based entry (card, code, or remote release) while maintaining free egress
Electric strike compatibility — works alongside electric strikes in retrofit configurations
These options make Keyman electrified exit devices appropriate for doors requiring both life-safety egress compliance and controlled access — common in schools, government buildings, healthcare facilities, and corporate offices.
For the full electrified product range, visit Keyman's Electrified Solution page.
Certifications and Compliance
Standard | Scope |
|---|---|
ANSI/BHMA A156.3 Grade 1 | Exit device durability and performance |
UL 305 FVSR | Panic hardware listing |
UL 10C | Positive pressure fire door assembly (3-hour) |
ULC-S104 | Canadian fire-rated door standard (3-hour) |
EN1125 | European panic exit hardware (select models) |
Frequently Asked Questions
Q: What is the difference between a panic exit device and an electrified panic exit device?
A standard panic exit device is purely mechanical — pressing the push bar retracts the latch and allows egress. An electrified panic exit device adds an electric actuator that enables remote latch retraction or integrates with an access control system for credential-based entry from the secure side, while always preserving free egress from the inside.
Q: Can Keyman exit devices be retrofitted to replace other manufacturers' devices?
The X800/X900 Series is specifically designed for both new installations and retrofit applications into other manufacturers' devices, reducing the need to replace door prep or frame hardware during upgrades.
Q: Are Keyman electrified exit devices suitable for fire-rated doors?
Yes. The X8 and X9 Series are rated to UL 10C and ULC-S104 for up to 3-hour fire-rated door assemblies, making them compliant for use on fire doors in commercial and institutional buildings.
Q: What access control systems are compatible with Keyman electrified exit devices?
Keyman electrified exit devices are designed to integrate with standard access control panels and systems that use dry-contact signals or low-voltage power supplies. For specific wiring requirements and compatibility, download the Exit Devices Catalogue or contact Keyman directly.
Q: Where can I download technical specifications for Keyman exit devices?
Technical documents — including the Exit Devices Catalogue, Heavy Duty Latch Spec, IC Mortise Cylinder spec, and X8/X9 product info — are available for download directly on the Exit Device page.
Why Choose Keyman for Electrified Exit Devices?
Keyman (Zhongshan Keyman Locks Products Ltd.) manufactures UL-listed and ANSI Grade 1 certified exit devices from its facility in Zhongshan, Guangdong, China. The X800/X900 product line is built to meet the highest safety and security standards in the industry and is deployed in offices, schools, banks, assisted living facilities, and other commercial and institutional buildings globally.
For specifications, certifications, or to request a quote, contact the Keyman team or view all exit device products.
KEYMAN is Your Choice Of Security!
If you have any questions regarding our products or services, please leave your details and our team will respond to you.
: +86-13823964887
: +86-13823964887
